David Round Co.

2 ea. Matching, Lo-Hed Vertical Capstans / Railcar Pullers, Class C-3.

See Manf. website at: http://www.davidround.com/overview/capstans.aspx

6000 pounds starting pull, 3000 pounds running pull

5hp 230/460 VAC, 60 Hertz, TENV motors

Very nice units with like brand new internals, no visible wear on any of the gears. Recent total exterior sand blast to white metal and new zinc primer paint. Insides thoroughly cleaned out and filled with fresh gear oil, boxes re-sealed, never-seeze applied where needed, new motor junction wiring boxes ("peckerheads"). Note * wiring boxes can be turned on 90 degree intervals to suit your installation. Finished with machinery gray enamel. New warning stickers applied. Original (metal) equipment identification tags and motor tags were replaced on the units with the original rivets, these tags are readable but they have some old paint on them and my ability to clean that old paint off without losing any of the information on the tags is very limited.

Cathead barrels are 7" diameter in the center and the part where the rope would wrap is 7.5" in height. The top lip on the cathead is 9.5" in diameter to keep the rope from coming off. The bottom of the "bell" on the cathead is 13.5" in diameter.

The base of the unit is 13.25" x 20.75" and it is 1.75" thick. There are four mounting holes which are 1 5/16ths diameter.

The length of the unit is 29" and the total height of the unit is 26.5". It weighs 600 pounds with no shipping materials.

I have an original copy (2) of the users manual and parts breakdown (one for each unit). The book also has a wiring diaghram and cut-away scaled drawings of the unit along with specs for mounting in concrete with anchor bolts (drawings for that also).

These are available to go to work today for SOLD each.

Located in the shop at 5917 Hwy 90 E, in Broussard, LA 70518

Shipping weight is about 650 each. Ships at class 85 from 70518

Contact us @ 985-384-9517 or www.triplecmarine.com